User guide

When the chosen operation is running, the background of the LC display changes to yellow
and the progress of the operation is shown.
When the operation has finished, the background of the LC display changes to green. The card
slot LEDs light up green alongside the successfully copied cards and red alongside cards with
errors. In order to copy more cards, remove the old cards, insert the new cards and press the
“Run” button again.
If an error occurs, an error message is shown and the background of the LC display changes to
red. In order to copy more cards, remove the old cards, insert the new cards and press the “Run”
button again.
If you are using a CopyOnInstertion (COI) copy mode, you have to plug in a master card before
you run the Operation („RUN“). At the end the CopyOnInsertion operation can be aborted with
„Stop“.
17/61