User guide

2.3.4 Using the IQ CopyStation
2.3.4.1 First time usage
Before starting to use the IQ CopyStation, check the packaging and make sure that nothing is
missing (see Scope of Delivery, chapter 1.3). Check that the power supply cable has the correct
mains power plug for your country. Do not attempt to use the IQ CopyStation if there is any visible
damage or damage to the power supply.
Attention: Never open the IQ CopyStation or the power supply to carry out repairs.
After checking the scope of delivery, attach the power supply cable to the power supply. Then
connect the plug to a mains power outlet with a voltage of 110 or 220 Volts. Following that, insert
the round power supply plug in the socket at the rear of the IQ CopyStation (see photo).
The IQ Copy Station initialises itself automatically after connecting up the power. The initialisation
process takes 10 to 20 seconds. The following menu is shown in the display when initialisation is
finished:
To switch off the IQ CopyStation again, pull out the power supply plug at the rear of the unit and
remove the mains power plug of the power supply from the mains power outlet.
14/61