User guide
– In case you are using an optionally available PCI add-on board with separate USB Host
Controller, there is provided a separate internal USB cable with a blue marking at the one
end. After installing the PCI card as usual, you need to connect the marked end of the cable
to the USB header on the card as shown by the following picture
.
Notice that the optional PCI card does also include a standard USB-A type socket so that
you also might use a standard USB cable for the connection with the Lite CopyStation
module.
– Notice that it is important that the user that is finally working with the Lite CopyStation
software hat got administrator rights (in both Windows XP and Vista/7 case!
11/61