Product data

.
c
Annex
DALI Manual | 08-2013 | en
88 / 93
Table: Important DALI commands
DALI command Description
Light level
(DAP)
Recalls the light value specified in the command. (The Fade Time parameter is used as the
cross-fade time)
DAP 0 means: Switch off the light in the cross-fade time set in the Fade Time parameter
Off Instantly switches the light off (no fade time)
Up Increases the light value for 200 ms by the fade steps defined in the Fade Rate parameter.
When the light value reaches the value defined in the Maximum Level parameter it remains at
this value.
Down Reduces the light value for 200 ms by the dimming steps defined in the Fade Rate parameter.
When the light value reaches the value defined in the Minimum Level parameter it remains at this
value.
Step up Increases the light value by one step
Step down Reduces the light value by one step
On and Step up Switches the light to the Minimum Level if the device was already off. If the device is on, the light
value is increased by one step.
Step down and
off
Reduces the light value by one step. When the device reaches the Minimum Level it is switched
off.
Recall MIN
Level
Calls up the Minimum Level light value (no cross-fade time)
Recall MAX
Level
Calls up the Maximum Level light value (no cross-fade time)
Go to scene X Calls up lighting scene “X”. (The Fade Time parameter is used as the cross-fade time)
...