Product data

.
c
Start-up
DALI Manual | 08-2013 | en
79 / 93
Step 3: Testing the addresses
Testing the addresses involves the devices being switched on one after the other with all the other devices switched
off.
The process is repeated when the last address is reached.
This function can be used to check whether the addresses are assigned as required.
Step 4: Grouping the devices
In this step the various ballasts are assigned to the DALI groups.
Chose and highlight relevant device
Click “Add >>" to add device to the group
If necessary: Click "<< Remove" to remove device from group again