Product data

Start-up

DALI Manual | 08-2013 | en

77 / 93

Setting up with masterCONFIGURATOR

The masterCONFIGURATOR enables the wiring of the DALI circuit to be tested, the devices to be addressed and the

group and scene settings to be completed, all in 5 easy steps. The masterCONFIGURATOR has its own separate

documentation (see Reference list).

Preparation

Before you can start setting up with masterCONFIGURATOR the DALI circuit must be linked to the computer via a

DALI USB.

Open the masterCONFIGURATOR to view the main window of the masterCONFIGURATOR. You can access all the

parameterisation and configuration options from this program window. Some options open further windows.

Step 1: Testing the wiring

This step checks that the wiring is correct for the installation.

After the test has been started the DALI commands “Recall min. Level” and “Recall max. Level” are sent alternately to

all the devices in the DALI circuit, causing the connected devices to flash.

This test determines whether communication is working properly in the DALI circuit and whether all the devices in the

DALI circuit are connected.