Product data

.
c
Designing a DALI application
DALI Manual | 08-2013 | en
66 / 93
Table: Grouping
Conference room
Downlights Group 1
Linear luminaires Group 2
DALI GC Switch position = 1 (Group 1+2):
Group 1 => Switch for downlights
Group 2 => Switch for linear luminaires
Scene assignment
Scenes are called up from two locations. Directly next to the door there is a double switch for switching the light on and
off. The control point next to the screen can also be used to switch the light on and off. In addition, two further
user-defined scenes (e.g. presentation) can be called up.
Here too the scenes can be set up in two ways, with the DALI SC or with the masterCONFIGURATOR configuration
software (see Reference list).
Table: Scene assignment
Control point near door Control point near screen
DALI SC Switch position = 1 (Scenes 1-4):
Scene 1 => Light off
Scene 2 => Light 100%
Scenes 3 and 4 not wired
Switch position = 1 (Scenes 1-4):
Scene 1 => Light off
Scene 2 => Light 100%
Scene 3 => Presentation
Scene 4 => Meeting
...