Product data

.
c
DALI x/e-touchPANEL 02
DALI Manual | 08-2013 | en
48 / 93
Colour operating mode
All colours of the RGB colour space are the result of the addition of the basic colours red, green and blue (RGB). For a
better representation of white light an additional white light source is used (RGBW colour mixing).The colour control of
a lighting system is performed in the Colour operating mode. The Colour operating mode is different from the standard
Basic operating mode with respect to the grouping of the operating devices.
In the x-touch software, each RGB-/RGBW operating device is assigned to the colour scale (red, green, blue, white) of
a zone. Four zones with 4 colour scales are available. The colour scale of a zone corresponds to a group. In the Home
menu, the white light can be switched and dimmed via groups 1 to 4.
The table shows the assignment of the 16 groups to the four colours of the individual zones. Zone assignment is
automatically controlled by the software.
W(hite) R(ed) G(reen) B(lue)
Zone 1 1 5 6 7
Zone 2 2 8 9 10
Zone 3 3 11 12 13
Zone 4 4 14 15 16
Typical application examples for the Colour operating mode are rooms where mainly RGBW operating devices are
used to implement freely design colour changes and colour effects, e.g. in shop windows, bars and exhibition spaces.
You can define a maximum of
Plug operating mode
With the Plug operating mode only one zone is used with the groups 1-4. The groups represent the colours red, green,
blue and white. The assignment to a group is done via a connector on the operating device. The classification into
scenes is not possible.
4 zones with the 4 colours red, green, blue and white with a total of 128 devices
16 scenes for white light
8 colour scenes
99 sequences
7 schedules
1 schedule list