Product data

.
c
DALI TOUCHPANEL 02
DALI Manual | 08-2013 | en
44 / 93
Table: Parameters for the dimming mode
Dimming mode selection Short press Long press
Toggle ON/OFF Toggles between the selected ON command and
OFF command
Dim up only Ignored On (if necessary) / fade up
Dim up and on for short press Perform the selected ON command On (if necessary) / fade up
Dim down only Ignored Fade down
Dim down and off for short
press
Perform the selected OFF command Fade down
Toggle up/down Ignored Toggle between fade up and
fade down
Toggle up/down and on/off for
short press
Toggles between the selected ON command and
OFF command
Toggle between fade up and
fade down
Example: Configuring the scene 1 button
Logical address Broadcast
Dimming mode toggle ON/OFF
ON/OFF command ON command: “Go to scene 1” / OFF command: “Go to scene 1”
Each time the button is pressed the command “Go to scene 1” is sent.
Example: Conference room Requirement
Requirements
I NOTICE
Selecting ON or OFF in dimming mode not only allows you to switch the lighting on or off, you can also select which
specific command for ON or OFF will be sent. ON and OFF are therefore variables.
On/off switching at the door
Dimming of all the lights (broadcast) at the control panel near the window
Retrieval of user-defined lighting scenes (e.g. the presentation scene) at the control panel near the window