Product data

.
c
DALI TOUCHPANEL 02
DALI Manual | 08-2013 | en
43 / 93
Connection
The DALI TOUCHPANEL 02 is connected directly to the DALI circuit and does not need a separate power supply. It is
powered via the DALI circuit (current draw = 6 mA in normal operation and 10 mA in service mode). It can be
connected to the DALI circuit with either polarity.
Basic functions
Figure: Button assignments of the factory layout
1) Scene buttons:
Calling up scenes 1-3
2) Group buttons:
Controlling assigned DALI devices or DALI groups.
Short press: ON, OFF
Long press: Dimming
3) Finder LED:
Red LED to find the panel in the dark.
Long press: LED on/off
Figure: Button assignments of the tunable white layout
1) On-/Off button:
Turning the Light on or OFF
2) Dim whell:
Recall of discrete dim calues by pressing on any position of the dim wheel.
Dimming by sliding along the dim wheel.
3) Finder LED:
Red LED to find the panel in the dark.
Long press: LED on/off
4) Tunable White button:
Change of the color temperature along the planckian locus via the buttons on
the right and left side. Adjusting to 4,500 K by pressing the button in the middle.
Configuration by software
The masterCONFIGURATOR (since V2.6) software can be used to assign each of the buttons on the
DALI-TOUCHPANEL 02. The DALI circuit can also be configured with the masterCONFIGURATOR (addressing,
grouping, etc.). In addition to the masterCONFIGURATOR (since V2.6) software you will need a DALI USB for the
connection between the computer and the DALI circuit.
The masterCONFIGURATOR has its own separate documentation (see Reference list).