Product data

.
c
DALI scene controllers: DALI-SC & SC-A
DALI Manual | 08-2013 | en
33 / 93
Switch 1 = scene 3, switch 2 = scene 4, switch 3 = scene 5, switch 4 = scene 6
Programming
Save scene
Figure: Scene assignment
Example: Conference room
Requirement
Hold down momentary switch (>10s)
→ A beep will sound
Press momentary switch (1s)
→ Current light value of all luminaires will be stored as scene value
→ Scene number of the momentary switch will be assigned to the scene
→ Scene can be activated with the chosen momentary switch
I NOTICE
The light value can be changed with any DALI control (e.g. DALI GC).
The programming mode is not integrated in DALI-SC-A so there is no chance of reprogramming the DALI units by
mistake via the switches.
On/off switching via switches
Dimming of two groups (linear luminaires and low-voltage halogen spotlights)
Retrieval of user-defined lighting scenes (e.g. the presentation scene)