Product data

.
c
DALI group controllers: DALI GC & GC-A
DALI Manual | 08-2013 | en
29 / 93
Finish programming mode
Figure: Finish programming mode
Example: Multiple independent small offices on the same DALI line
Requirement
Hold button down (>9s)
→ First beep will sound (after 3s)
→ Second beep will sound (after another 3s)
→ Third beep will sound (after another 3s)
Release button
→ Programming mode is finished
→ All buttons in the system are back in their normal state
On/off switching via switches
Dimming of two groups (window luminaires and corridor luminaires)