Product data

.
c
DALI group controllers: DALI GC & GC-A
DALI Manual | 08-2013 | en
28 / 93
The group assigned to a switch (rotary switch setting) can be stored in the selected DALI device by pressing the
appropriate momentary switch (for longer than 3 seconds; you will hear a beep). This means that the luminaire will then
react to fade commands from this momentary switch.
Figure: Group assignment
Removing a luminaire from a group
Figure: Removing a luminaire from a group
Choose a button that is assigned to the right group
Hold button down (>3s)
→ A beep will sound
→ The group assigned will be stored in the DALI device
→ Luminaire will react to fade commands coming from the chosen button
Make sure that the right luminaire is selected
Choose a button that is assigned to the right group
Hold button down (>6s)
→ First beep will sound (after 3s)
→ Second beep will sound (after another 3s)
→ The group assigned of the button will be deleted
→ Luminaire will not react anymore to fade commands coming from the chosen button