Product data

DALI group controllers: DALI GC & GC-A

DALI Manual | 08-2013 | en

25 / 93

Table: Momentary switch functions single switch

Depress time single switch Function

40 to 300 ms On to max / Off

> 300 ms On (if necessary) / dim

Group assignment

A rotary switch on the back of the module is used for group assignment. The switch setting shown corresponds to

group A. Group B is the group immediately following group A.

Table: Group assignment

Rotary switch setting Group switch 1 Group switch 2

0 Broadcast 1

1 1 2

2 2 3

3...9 3...9 4...10

A...F 10...15 11...16

Example:

Rotary switch setting = 3, therefore:

Switch 1 = group 3, switch 2 = group 4

Programming

With the DALI-GC it is also possible to address and configure simple DALI installations. The programming mode is not

integrated in DALI-GC-A so there is no chance of reprogramming the DALI units by mistake via the momentary

switches.