User manual

User Manual of Hikvision iVMS-4200 v2.0
72
Note: Check the checkbox Add Offline Device, input the required information and the device channel
count, and then click Add. When the offline device comes online, the software will connect it
automatically.
The devices will be displayed on the device list for management after added successfully. You can
check the nickname, IP address, serial No., HDD status, recording status and other information of the
added devices on the list.
Click Refresh All to refresh the information of all added devices. You can also input the device name in
the filter field for search.
Select device from the list, click Modify/Delete, and then you can modify/delete the information of
the selected device.
Select device from the list, click Remote Config, and then you can do some remote configurations of
the selected device if needed.
Importing Devices to Groups
Purpose:
After the devices added successfully, you can import the devices into groups for a convenient
management.
Steps:
1. Open the Device Management page.
2. Click the Group tab to enter the Group Management interface.
3. Click Add Group to open the Add Group dialog box.
4. Input the group name and click OK to create a new group.
5. Click Import to enter the Import Device interface.
6. Select the encoding channels from the device list and then select a group from the group list.
7. Click Import Select to import the selected encoding channels to the group.
You can also click Import All to import all the encoding channels to a selected group.