User manual

User Manual of Hikvision iVMS-4200 v2.0
70
Adding Devices by IP Segment
Steps:
1. Click the icon to open the device adding dialog box.
2. Select IP Segment as the adding mode from the drop-down list.
3. Input the required information.
Start IP: Input a start IP address.
End IP: Input an end IP address in the same network segment with the start IP.
Port: Input the device port number. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password. By default, the password is 12345.
4. Optionally, you can check the checkbox Export to Group to create a group by the device IP. All the
channels of the device will be imported to the corresponding group by default.
5. Click OK, and the device of which the IP address is between the start IP and end IP will be added
to the device list.