User manual

User Manual of Hikvision iVMS-4200 v2.0
69
10.2 Device Management
Purpose:
Before doing any operations via the web browser, devices need to be added to the system for
monitoring and management. You can add devices through the web browser.
Adding the Encoding Device
Steps:
1. Click the Device Management tab to open the Device Management page.
2. Click the Server tab.
3. Click Encoding Device to enter Encoding Device Adding interface.
You can add the encoding device in the following ways:
 Adding Devices Manually.
 Adding Devices by IP Segment.
 Adding Devices by IP Server.
 Adding Devices by HiDDNS.
Adding Devices Manually
Steps:
1. Click the icon to open the device adding dialog box.
2. Select IP/Domain as the adding mode from the drop-down list.
3. Input the required information.
Nickname: Edit a name for the device as you want.
Address: Input the device’s IP address or domain name.
Port: Input the device port number. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password. By default, the password is 12345.
4. Optionally, you can check the checkbox Export to Group to create a group by the device name. All
the channels of the device will be imported to the corresponding group by default.
5. Click OK to add the device.