User manual

User Manual of Hikvision iVMS-4200 v2.0
62
7.2.5 Email Settings
Purpose:
An Email notification can be sent when a system alarm occurs. To send the Email to some specified
receivers, the settings of the Email need to be configured before proceeding.
Steps:
1. Open the System Configuration page.
2. Click the Email tab to enter the Email Settings interface.
3. Input the required information.
SMTP Server: Input the SMTP Server address.
Port: Input the communication port of Email service. The port is 25 by default.
User Name: Input the user name of the sender Email address.
Password: Input the password of the sender Email address.
Sender Address: Input the Email address of the sender.
Receiver 1—3: Input the Email address of the receiver. Up to 3 receivers can be set.
4. Optionally, you can check the checkbox Enable SSL to increase the security of email sending.
5. Optionally, you can click Send Test Email to send an email to the receiver for test.
6. Click Save to save the settings.