User manual

User Manual of Hikvision iVMS-4200 v2.0
47
Maximize
Maximize the Alarms and Events panel in a new tab page.
Show/Hide
Click to show/hide the Alarms and Events panel.
Viewing Alarms Information
Different alarm types can be displayed on the panel: Motion Detection, Video Exception, Alarm Input
and Device Exception. You can check the checkbox to enable the displaying of that type alarm.
Before you start:
To display the alarms, the event parameters need to be configured.
Steps:
1. Click the Alarm tab.
2. Check the checkboxes of different alarm types.
3. When an alarm occurs, the icon twinkles to call attention. The alarm information, including
the time, source, details and content will be displayed.
Click to get a live view of the alarm triggered camera.
Click to send an Email notification of the alarm to one or more receivers.
Click to display the video of alarm triggered camera on the Video Wall.
Click under the Note column to input a prompt message for the alarm.
4. To clear the alarm information, click the icon ,or right-click on an alarm log and then click
Clear.
Viewing Events Information
Purpose:
The abnormal events of the client software, such as the live view failure, device disconnection, can
also be displayed.
Steps:
1. Click the Event tab.
The event information, including the time and detailed description will be displayed.
2. To clear the event information, click the icon ,or right-click on the event log and then click
Clear.