User manual

User Manual of Hikvision iVMS-4200 v2.0
45
Table 4.5 Linkage Actions for Alarm Input
Linkage Actions
Descriptions
Alarm Output
Enable the alarm output function. Select the alarm output port and the
external device connected to the port can be controlled.
Channel Record
Start the recording of the selected cameras when alarm is triggered.
Audible Warning
The client software gives an audible warning when alarm is triggered.
Email Linkage
Send an Email notification of the alarm information to one or more receivers.
Alarm on E-map
Display the alarm information on the E-map.
Alarm Triggered
Pop-up Image
The Image with alarm information pops up when alarm is triggered.
Alarm Triggered
Video Wall Display
Display the video on the Video Wall when alarm is triggered.
4.6 Configuring Device Exception Linkage
Steps:
1. Open the Event Management page and click the Device Exception tab.
2. Select the device to be configured.
3. Select the device exception type, including HDD full, HDD exception, illegal login, etc.
4. Check the checkbox Enable.
5. Check the checkboxes to activate the linkage actions. For details, see Table 4.6 Linkage Actions for
Device Exception.
6. Optionally, click Copy to… to copy the event parameters to other devices.
7. Click Save to save the settings.