User manual

User Manual of Hikvision iVMS-4200 v2.0
44
Audible Warning
The client software gives an audible warning when alarm is triggered.
Email Linkage
Send an Email notification of the alarm information to one or more receivers.
Alarm on E-map
Display the alarm information on the E-map.
Alarm Triggered
Pop-up Image
The Image of the triggered camera pops up when alarm is triggered.
Alarm Triggered
Video Wall Display
Display the video of the triggered camera on the Video Wall when alarm is
triggered.
4.5 Configuring Alarm Input Linkage
Purpose:
When a device's alarm input port receives a signal from an external alarm device, such as smoke
detector, doorbell, etc., the alarm input linkage actions are triggered for notification.
Before you start:
Add the alarm inputs to the client, click Import on the Group Management interface, click the Alarm
Input tab and import alarm inputs into groups for management.
Steps:
1. Open the Event Management page and click the Alarm Input tab.
2. Select the alarm input channel to be configured.
3. Check the checkbox Enable.
4. Input a descriptive name of the alarm.
5. Set the alarm status according to the alarm input device.
6. Select the arming schedule template from the drop-down list.
If you need to edit or customize the template, see Configuring Arming Schedule Template.
7. Check the checkboxes to activate the linkage actions. For details, see Table 4.5 Linkage Actions for
Alarm Input.
8. Optionally, click Copy to… to copy the event parameters to other alarm inputs.
9. Click Save to save the settings.