User manual

User Manual of Hikvision iVMS-4200 v2.0
43
Alarm Triggered
Pop-up Image
The Image with alarm information pops up when alarm is triggered.
Alarm Triggered
Video Wall Display
Display the video on the Video Wall when alarm is triggered.
4.4 Configuring Video Loss Alarm
Purpose:
When the client software cannot receive video signal from the front-end devices, the video loss alarm
will be triggered. The linkage actions, including alarm output and client action can be set.
Steps:
1. Open the Event Management page and click Camera Event tab.
2. Select the camera to be configured and select Video Loss as the event type.
3. Check the checkbox Enable to enable the function of video loss alarm.
4. Select the arming schedule template from the drop-down list.
If you need to edit or customize the template, see Configuring Arming Schedule Template.
5. Select the triggered camera. The image or video from the triggered camera will pop up or be
displayed on the Video Wall when video loss alarm occurs.
6. Check the checkboxes to activate the linkage actions. For details, see Table 4.4 Linkage Actions for
Video Loss Alarm.
7. Optionally, click Copy to… to copy the event parameters to other cameras.
8. Click Save to save the new settings.
Table 4.4 Linkage Actions for Video Loss Alarm
Linkage Actions
Descriptions
Alarm Output
Enable the alarm output function. Select the alarm output port and the
external device connected to the port can be controlled.