User manual

User Manual of Hikvision iVMS-4200 v2.0
39
Template 01-09: fixed templates for special schedules. You can edit the templates if needed.
Custom: can be customized as desired.
If you need to edit or customize the template, see Configuring Arming Schedule Template.
5. Click-and-drag the mouse to draw a defined area for the arming region.
You can click the icon to set the whole video area as detection area, or click the icon to
clear all the detection area.
6. Drag the slider on the sensitivity bar to adjust the motion detection sensitivity. The larger the
value is, the more sensitive the detection is.
7. Check the checkboxes to activate the linkage actions. For details, see Table 4.1 Linkage Actions for
Motion Detection Alarm.
8. Optionally, click Copy to… to copy the event parameters to other channels.
9. Click Save to save the settings.
Table 4.1 Linkage Actions for Motion Detection Alarm
Linkage Actions
Descriptions
Alarm Output
Enable the alarm output function. Select the alarm output port and the
external device connected to the port can be controlled.
Channel Record
Start the recording of the selected cameras when alarm is triggered.
Audible Warning
The client software gives an audible warning when alarm is triggered.
Email Linkage
Send an Email notification of the alarm information to one or more receivers.
Alarm on E-map
Display the alarm information on the E-map.
Alarm Triggered
Pop-up Image
The Image with alarm information pops up when alarm is triggered.
Alarm Triggered
Video Wall Display
Display the video on the Video Wall when alarm is triggered.
Configuring Arming Schedule Template
Perform the following steps to configure the arming schedule template:
If Template 01-09 is selected in the drop-down list, start from step 1;