User manual

User Manual of Hikvision iVMS-4200 v2.0
10
2.2.2 Adding Devices Manually
Steps:
1. Click Add Device to open the device adding dialog box.
2. Select IP/Domain as the adding mode.
3. Input the required information.
Nickname: Edit a name for the device as you want.
Address: Input the device’s IP address or domain name.
Port: Input the device port number. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password. By default, the password is 12345.
4. Optionally, you can check the checkbox Export to Group to create a group by the device name. All
the channels of the device will be imported to the corresponding group by default.
5. Click Add to add the device.
2.2.3 Adding Devices by IP Segment
Steps:
1. Click Add Device to open the device adding dialog box.
2. Select IP Segment as the adding mode.
3. Input the required information.
Start IP: Input a start IP address.
End IP: Input an end IP address in the same network segment with the start IP.
Port: Input the device port number. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password. By default, the password is 12345.
4. Optionally, you can check the checkbox Export to Group to create a group by the device IP. All the
channels of the device will be imported to the corresponding group by default.
5. Click Add, and the device of which the IP address is between the start IP and end IP will be added