M O D E L XA3001 User's guide
The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not remove cover (or back). No user- serviceable parts inside. Refer servicing to qualified service personnel.
XA3001 2. Plug the remaining set of red and white RCA connectors on the supplied cable in the red (right) and white (left) inputs on your XA3001 subwoofer. Video Gaming & TV Audio Subwoofer WELCOME Alternative Connection Method System Specifications Total System Power: 30 Watts (15 Watts RMS) POWER REQUIREMENTS Frequency Response: 35 Hz - 150 Hz USA/Canada/and applicable Signal to Noise Ratio @ 1 kHz input: >77 dB Welcome to the extraordinary world of Altec Lansing high-fidelity sound.
TROUBLESHOOTING TIPS SYMPTOM POSSIBLE PROBLEM SOLUTION No sound from subwoofer or TV speakers. Power is not turned on. Verify that the subwoofer’s AC power cord is plugged into both the subwoofer and wall outlet. Verify that the Power button has been pressed and that the power LED is illuminated. Bass level is set too low. Turn the bass level rotary knob to the right to raise the subwoofer volume. Check volume level on the audio source device, and set at mid-level.
Corporate Headquarters Asia/Pacific Rte.
