Instruction Manual

8
battery. The charging time of the USB interface would be longer due to the smaller current.
microSD card installation
This device supports the use of microSD card to storing video files. The support capacity is 8GB to 32GB. It is
recommended to use microSD card with Class 6 or faster. Insert the microSD card into the slot of the device as
shown below:
Turn on/off the device
Off mode: The red and blue light each will flash once during activating while the user switches the power switch to
‘ON’.
On mode: User could turn off the device by switch ‘Off’, all the indicators will turn off.
Note: The camera will enter the standby mode when it has been idle for more than 15 seconds.
How to reset the camera
1. Long press (5 seconds) the reset button, red lights on and turn to flashing blue light for connection.
2. Please follow the instruction of ‘Wi-Fi Connection’.
3. The flashing blue light will turn to red light, then blue light keeps on. It means the camera has connected to
the Wi-Fi.