Instruction Manual

6
Installation for Waterproof Shell
Waterproof shell installation: Please install the waterproof shell to prevent rainwater directly spilling onto the
device. Rotate the waterproof shell clockwise to the main camera body until it is securely fixed.
Note: Please tighten the waterproof shell to the camera body for liquid avoidance. It is against the
warranty service if the product did not follow the installation instruction.
Fixing the camera on the wall
1. Drill two holes on the wall based on the two holes on the metal plate.
2. Fit the rubber expansion plugs into the holes.
3. Fix the metal plate on the wall.
4. Place the magnetic base to the metal plate.
5. Place the camera to the magnetic base.
6. Adjust the camera gently to the preferred angle.