Altec Lansing inMotion Max Portable Speaker for iPhone and iPod iMT702 ™ ® User Guide
Welcome Thank you for purchasing the Altec Lansing inMotion Max speaker system. Designed specifically to work with your iPhone and iPod, this system provides high-quality audio and radio performance that brings out the best in your music.
Safety Information The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Contents Welcome.................................................................................................................................................................................................. ii Safety Information................................................................................................................................................................................... 1 Package Contents..................................................................................
Package Contents Altec Lansing inMotion Max speaker system User Guide and Quick Connect Instructions Enhanced remote Miscellaneous adapters for iPhone and iPod AC adapter FM radio antenna 3
Getting Started How to Install the AC Adapter How to Disconnect the Rechargeable Battery 1 If you need to replace the lithium-ion battery, you will need to first remove it. Connect the AC adapter cable plug into the speaker system’s jack. The jack is located on the back of the system. 2 1 2 Remove the rechargeable battery compartment cover. The battery compartment is located on the back of the speaker system. Remove the 2 screws securing the cover in place. Then remove the cover.
Placing and Removing Adapters for the iPhone and iPod Your Altec Lansing inMotion Max speaker system includes removable adapters for today’s popular iPhone and iPod models. These adapters ensure that your iPhone and iPod properly fit in the speaker system’s dock. As new iPhone and iPod models are introduced, new adapters will be made available to customers. You may also use the adapters supplied with your iPhone or iPod or available for purchase at www.apple.com.
Speaker Features and Indicators Expanded Sound Stage technology button Track forward button Track back button Volume increase button Volume decrease button Source button Power on/off button LCD display FM antenna connector AUX jack AC adapter jack Universal docking station for iPhone or iPod 6
Speaker Controls Turn on your speaker system Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started section for more information. Press the button. Turn off your speaker system Press the button. Whenever you are finished using your speaker system, please remember to turn it and your iPhone, iPod or other MP3 player off to conserve electricity. Change audio source Press the Turn up the volume Press the + button. Turn down the volume Press the – button.
Speaker Controls 8 Listen to a non-docking iPod or MP3 player See the Listening to a Non-docking iPod or Other Portable Audio Device section for specific information on using devices attached to your speaker system’s AUX jack. Activate Expanded Sound Stage (ESS) technology Proprietary ESS technology widens the stereo image to fill a room with sound. Press the ESS button to activate it. Reset all settings buttons simultaneously for a few seconds.
Enhanced Remote Features The enhanced remote lets you operate many functions of your Altec Lansing inMotion Max speaker system: Turn on your speaker system Press the button. Turn off your speaker system Press the button. Change audio source Press the button to cycle through and select the audio source: iPod, FM radio or AUX. Turn up the volume Press the + button. Turn down the volume Press the – button.
Enhanced Remote Features Tune radio stations In “FM” mode, use the information. Seek radio stations In “FM” mode, press and hold the additional information. Store a radio station In “FM” mode, tune to the station you’d like to store, and then press and hold one of the PRESET buttons (P1, P2, P3 or P4). See the Listening to the Radio section for more information. Select a preset radio station In “FM” mode, press the PRESET button (P1, P2, P3 or P4) that corresponds to the station you’d like to hear.
Listening to Your iPhone or iPod 1 Dock your iPhone or iPod in the Altec Lansing inMotion Max speaker system. 2 Select “iPod” mode. How to Access Additional Features on Your iPhone or iPod Using the Enhanced Remote Shuffle function Press the P1 button once on the enhanced remote to advance to the next shuffle mode. SH ALBU is displayed when the system is in album shuffle mode. SH SONG is displayed when the system is in song shuffle mode.
Charging Your iPhone or iPod Whenever your iPhone or iPod is docked and your Altec Lansing inMotion Max speaker system is plugged into an AC outlet, your iPhone or iPod is charging (until fully charged) – even if the speaker system is switched off. Listening to the FM Radio 1 2 3 Plug the FM radio antenna into the speaker system’s FM ANTENNA jack. 2 To store other stations, repeat the above steps. How to Recall Preset Stations Make sure you are in “FM” mode.
Listening to a Non-docking iPod or Other Portable Audio Device If you have a non-iPod MP3 player or other non-docking portable audio device, you can enjoy it through your Altec Lansing inMotion Max speaker system as well. Just connect it via the AUX jack. Here’s how: 1 Locate a 3.5 mm stereo cable (not included). 2 Plug one end of the stereo cable into your device. Maintaining Your Speaker System Place your speaker system on a level surface away from sources of direct sunlight or excessive heat.
Troubleshooting Symptom Speaker system doesn’t respond (no power) iPhone or iPod doesn’t dock properly iPhone or iPod doesn’t respond to the speaker system 14 Possible Problem Solution AC adapter isn’t plugged into a wall outlet or the connector isn’t plugged into the power supply jack on the back of the speaker system Plug the AC adapter into a wall outlet and plug the connector into the power supply jack on the back of the speaker system.
Troubleshooting Symptom Possible Problem Solution iPhone or iPod is not installed properly Remove your iPhone or iPod from the dock and check for obstructions on the connectors in the dock and on your iPhone or iPod. Then reseat it in the dock. iPhone or iPod is locked up Please make sure your iPhone or iPod is working properly before docking into the unit. Please refer to your iPhone or iPod manual for details.
Troubleshooting 16 Symptom Possible Problem Solution The speaker system exhibits erratic or unexpected behavior. Controls do not function. Static electricity, momentary interruption of 1. Disconnect the AC adapter cable plug from the speaker system’s jack. power or abnormal operating conditions 2. Close the stand on the back of the speaker system. may be responsible. 3. Wait 20–30 seconds. 4. Open the stand on the back of the speaker system. 5.
Warranty Altec Lansing One-Year Limited Warranty What Does the Warranty Cover? Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below. What Is the Period of Coverage? This warranty runs for one year from the date of purchase. The term of any warranties implied by law shall expire when your limited warranty expires.
www.alteclansing.com Headquarters Europe 535 Rte. 6 & 209, Milford, PA 18337-0277 • 800-ALTEC-88. 570-296-4434. • Fax 570-296-6887 13 Rue Beaumont, L-1219 Luxembourg, Luxembourg Asia/Pacific 23/F, Office Tower, Shun Hing Square Diwang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, China 518008 “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
