User’s guide
The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
INMOTION IM510 MOBILE AUDIO Power Use one of the following two options to power your inMotion iM510: AC (Wall outlet) Power Insert the barrel connector from the power supply into the DC connector on the rear of the inMotion iM510. After this connection is made, insert the power supply into a wall outlet. DC (Battery) Power Install four AA batteries (not included) into the battery compartments on the bottom of the inMotion iM510 (two to each compartment).
– Turn off the iM510 and disconnect the power supply. – Use a USB cable (not included) to connect the iM510 to your computer. Note: After syncing the Sansa player to your computer, be sure to disconnect the USB cable before reconnecting the power supply or turning the iM510 on. 1. Connect one end of the 3.5 mm stereo cable into the auxiliary input jack (AUX) located on the back of the inMotion iM510 system, and the other end to the headphone or line out jack on your alternate audio device. 2.
Symptom Possible Problem Solution The Power LED is not lit (Battery Operation). No batteries are installed. Install four AA batteries (not included) into the battery compartments on the bottom of the inMotion iM510 (two to each compartment). Make sure the batteries are installed as illustrated in the battery compartments. The power isn’t turned on. Turn on the inMotion iM510 by pushing the power button located on the top of the unit. A blue LED will light around the button when the power is on.
Symptom Possible Problem Solution There is a crackling sound coming from speakers. The Sansa player is not correctly seated into the docking station. Turn off the Sansa player, remove it from the docking station, reseat it, and turn it on again. If using an alternate audio source, the audio source is not properly connected to the inMotion iM510 or there is a problem with the alternate audio source.
This Class B digital apparatus complies with Canadian ICES-003. • Cet appareillage digital de Classe B est conforme au ICES-003 canadien. Corporate Headquarters 535 Rte. 6 & 209, Milford, PA 18337-0277, USA • 866-570-5702 • 570-296-4434 • Fax 570-296-6887 Designed in USA.
