User`s guide

4
Power Off
Turn off the inMotion iM310 by pushing the
power button located on the left side of the
top of the inMotion iM310. The indicator light
shuts off.
Auto Shut-down (Standby)
The inMotion iM310 automatically shuts down
if no audio is detected for three minutes.
NOTE: The Auto Shut-down (Standby) feature
is active during battery-only operation. If the
AC wall adapter is used, the inMotion iM310
will remain on as long as the power switch is
in the “On” position.
Connecting to alternate
audio source
The inMotion iM310 system includes an input
jack that allows you to connect to alternate
audio sources, such as non-dockable iPod
models, CD players, MP3 players, portable DVD
players, and laptops. To connect the iM310 to an
alternate audio source, follow the steps below.
1. Locate a 3.5 mm stereo cable (sold
separately).
2. Connect one end of the 3.5 mm stereo cable
into the auxiliary input jack (AUX) located
on the back of the inMotion iM310 system,
and the other end to the headphone or line
out jack on your alternate audio device.
3. Set the volume on the audio source at
mid-level.
4. Set the volume on the inMotion iM310
at minimum level and adjust upward to a
comfortable listening level.
Volume
The slider on the top of the inMotion iM310
is the master volume control for the speaker
system. Move the slider to the right to
increase the volume or to the left to decrease
the volume.