Altec Lansing Mix™ Portable Speaker for iPhone™ and iPod® iMT800 User Guide
Welcome International Distribution Thank you for purchasing the Altec Lansing Mix speaker system. Designed specifically to work with your iPhone and iPod, this system provides highquality audio and radio performance that brings out the best in your music. International customers: For information regarding the distribution of Altec Lansing products in your country, please visit www.alteclansing.com and click on your region. This Altec Lansing speaker system is compatible with all iPhone and iPod models.
Safety Information The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Contents Welcome................................................................................................................................................................................................................................ ii Safety Information................................................................................................................................................................................................................. 1 Package Contents......................
Package Contents Altec Lansing Mix speaker system Clip-on remote Miscellaneous adapters for iPhone and iPod AC adapter en Two 3.
Getting Started How to Install the AC Adapter 1 2 The jack is located on the back of the system. NOTE When you are finished listening to your portable audio device, please remember to turn both it and your speaker system off to conserve electricity. Plug the AC adapter into the wall outlet. Your Altec Lansing Mix speaker system can also be powered by 8 D-size (LR20) batteries (not included).
Placing and Removing Adapters for the iPhone and iPod Your Altec Lansing Mix speaker system includes removable adapters for today’s popular iPhone and iPod models. These adapters ensure that your iPhone and iPod properly fit in the speaker system’s dock. As new iPhone and iPod models are introduced, new adapters will be made available to customers. You may also use the adapter supplied with your iPhone or iPod, or available for purchase at www.apple.com.
Speaker Features and Indicators Power/volume increase/ volume decrease knob Track back button EQ button Track forward button Source button FM antenna Two AUX jacks LCD display Battery indicator FM stereo indicator AC adapter jack Guard for iPhone or iPod Universal docking station for iPhone or iPod 6
Speaker Controls Turn on your speaker system Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started section for more information. Press the knob. Turn off your speaker system Press the knob. Whenever you are finished using your speaker system, please remember to turn it and your iPhone, iPod or other MP3 player off to conserve electricity.
Speaker Controls 8 Scan radio stations In “FM” mode, press and hold the information. Listen to an additional iPhone, iPod, nondocking iPod or other portable audio device See the Listening to Additional iPhone, iPod, Non-Docking iPod or Other Portable Audio Devices section for specific information on using devices attached to your speaker system’s AUX jacks. Enter a personalized power-on message See the Personalizing the Power-On Message section for specific information on using this feature.
Clip-On Remote Features The clip-on remote lets you operate many functions of your Altec Lansing Mix speaker system: Turn on your speaker system Press the button. Turn off your speaker system Press the button. Change audio source Press the “SOURCE” button to cycle through and select the audio source: iPod, FM radio, AUX 1 or AUX 2. Turn up the volume Press the “+” button. Turn down the volume Press the “–” button.
Clip-On Remote Features Play/pause a song on your iPhone or iPod In “iPod” mode, press the to pause it. Tune radio stations In “FM” mode, use the information. Seek radio stations In “FM” mode, press and hold the additional information. Store a radio station In “FM” mode, tune to the station you’d like to store, and then press and hold one of the PRESET buttons (P1, P2, P3 or P4). See the Listening to the Radio section for more information.
Listening to Your iPhone or iPod 1 Dock your iPhone or iPod in the Altec Lansing Mix speaker system. Make sure the correct adapter for iPhone or iPod is inserted in the speaker system’s dock. Slide the guard down to protect the iPhone or iPod. 2 Select “iPod” mode. Press the “SOURCE” button on your speaker system or clip-on remote until the iPod icon appears on the LCD. 3 Press the button on your iPhone, iPod, or clip-on remote. Music from your iPhone or iPod will start playing.
Listening to Your iPhone or iPod How to Access Additional Features on Your iPhone or iPod Using the Clip-on Remote First, select “iPod” mode. Press the “SOURCE” button on your speaker system or clip-on remote until the iPod icon appears on the LCD. Shuffle function 12 Press the P1 button once on the clip-on remote to advance to the next shuffle mode: • “ Shuffle S” is displayed when the system is in song shuffle mode. • “ Shuffle A” is displayed when the system is in album shuffle mode.
Setting EQ Controls How to Set the Bass and Treble Control Using the Onboard Controls 1 Press the “EQ” button once. The Bass Control screen will appear on the LCD. 2 Increase or decrease the bass level. Rotate the 3 knob. Enter the Treble Control screen. Press the EQ button again. The Treble Control screen will appear. 4 knob. How to Set the Bass and Treble Control Using the Clip-On Remote 1 2 1 Press and hold the “EQ” button for approximately 3 seconds. 2 Select your desired preset.
Setting EQ Controls NOTE You can personalize the EQ presets by selecting a Preset EQ then pressing the “EQ” button twice to enter the Bass/Treble Control Mode. There you can make adjustments to the Preset EQs as described in the Bass and Treble Control sections. Changes are saved automatically. 1 Note: To reset the EQ Presets to factory settings, press and hold the EQ button for a few seconds.
Charging Your iPhone or iPod Whenever your iPhone or iPod is docked and your Altec Lansing inMotion Max speaker system is plugged into an AC outlet, your iPhone or iPod is charging (until fully charged) – even if the speaker system is switched off. Listening to the FM Radio 1 Extend the FM antenna fully for best FM reception. 2 Select “FM” mode. 3 Your Altec Lansing Mix speaker system’s clip-on remote enables you to program up to 4 FM station presets: 1 Tune to the station you wish to store.
Listening to Additional iPhone, iPod, Non-Docking iPod or Other Audio Devices If you or a friend has an iPhone, iPod, non-iPod MP3 player or other non-docking audio device, you can enjoy it through your Altec Lansing Mix speaker system as well. Just connect it via the AUX 1 or AUX 2 jack. Here’s how: 1 Locate one of the two 3.5 mm stereo cables ( included). 2 Plug one end of the stereo cable into your device. Your device should have either a headphone or LINE OUT jack for you to plug into.
Personalizing the Power-On Message Whenever you turn on your Altec Lansing Mix speaker system, the Altec Lansing logo will appear for approximately 3 seconds followed by a personalized message, if you’ve set one. The Mix comes with no preset power-on message. To create a personalized message, just follow these instructions: 1 Add your personal message. Rotate the knob until the desired letter, number or symbol is displayed. Press the button to make your selection and move to the next space.
Troubleshooting Symptom Speaker system doesn’t respond (no power) iPhone or iPod doesn’t dock properly 18 Possible Problem Solution AC adapter isn’t plugged into a wall outlet or the connector isn’t plugged into the power supply jack on the back of the speaker system Plug the AC adapter into a wall outlet and plug the connector into the power supply jack on the back of the speaker system. Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working.
Troubleshooting Symptom iPhone or iPod doesn’t respond to the speaker system Possible Problem Solution iPhone or iPod is not installed properly Remove your iPhone or iPod from the dock and check for obstructions on the connectors in the dock and on your iPhone or iPod. Then reseat it in the dock and slide the guard down to protect it. Your iPhone or iPod software is too old Upgrade software on your iPhone or iPod. For details visit www.apple.com/ipod/download.
Troubleshooting Symptom Possible Problem Solution EQ settings are set too high. Decrease the EQ settings. Sound source is distorted If the iPhone or iPod original sound source (MP3) is of poor quality, distortion and noise are easily noticed with high-power speakers. Try a different audio source such as a music CD. Battery is weak Replace current battery with a new battery. Clip-on remote is not pointed toward to the speaker system.
Warranty ALTEC LANSING ONE-YEAR LIMITED WARRANTY What Does the Warranty Cover? Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below. What Is the Period of Coverage? This warranty runs for one year from the date of purchase. The term of any warranties implied by law shall expire when your limited warranty expires.
www.alteclansing.com Headquarters 535 Rte. 6 & 209, Milford, PA 18337-0277 • 800-ALTEC-88. 570-296-4434. • Fax 570-296-6887 Europe Scorpius 140, 2132 LR Hoofddorp, The Netherlands Asia/Pacific 23/F, Office Tower, Shun Hing Square Diwang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, China 518008 “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
