User guide

9
EN
Setting EQ Controls
How to Select Your Desired EQ Preset
Ontheremotecontrol,pressthebuttonthatcorrespondswithyourdesired
EQsetting:
•ROCK
•POP
•HIPHOP
•ALTECEQ
How to Listen to Your iPhone or iPod
1 Dock your iPhone or iPod in
the Altec Lansing inMotion
iMT630 speaker system.
2 Turn on your speaker
system.
3 Select your audio source:
iPod.
4 Find your desired song.
5 Start playing your song.
6 Adjust the volume.
NOTE To conserve battery power, reduce the speaker system volume level.
NOTE Duringbattery-onlyoperation,thespeakersystemautomatically
shuts down if no audio is detected for a few minutes. This is to conserve
battery power. Press the
button to turn the speaker system back on.
NOTE WheneveryouriPhoneoriPodisdockedandyourAltecLansing
inMotioniMT630speakersystemispluggedintoanACoutlet,youriPhone
oriPodischarging(untilfullycharged)—evenifthespeakersystemis
switched off.
NOTE The speaker system is compatible with the alarm clock and sleep
timerfeaturesbuiltintotheiPhoneandiPod.Forthesefeaturestowork
properly and play through the speaker system, the speaker system must
beconnectedtoawalloutletandturnedon.WhenaniPhoneoriPodis
docked, the speaker system will not shut down automatically, enabling the
alarmorsleeptimertoplaythroughthespeakersystem.Seetheuserguide
for your iPhone or iPod for details on how to access these features.
NOTE DuringACoperation,ifthereisnoiPhoneoriPoddockedand
no audio input signal is detected for a few minutes, the speaker system
automatically shuts down to conserve energy. Press the
button to turn
the speaker system back on.