User guide

18
Symptom Possible Problem Solution
Soundisdistorted
Volume level is set too high. Decrease the volume.
Soundsourceisdistorted. IftheiPhoneoriPodoriginalsoundsource(MP3)isofpoorquality,distortion
and noise are easily noticed with high-power speakers. Try a different audio
source such as a music CD.
Full-featuredremote
doesn’t work
Batteryisweak. Replacecurrentbatterywithanewbattery.
Full-featuredremoteisnotpointedtoward
to the speaker system.
Point the full-featured remote toward the Altec Lansing speaker system and
movewithin10feetoftheunit.
No sound from the AUX
device,suchasanMP3
player or CD player
connectedtotheAUXjack
Volume on the device is set too low. Increase the volume on the device to approximately ¾ full volume.
SourceselectorisnotsettoAUX. SetsourceselectortoAUX.
The speaker system
exhibits erratic or
unexpected behavior;
controls do not function
Staticelectricity,momentaryinterruptionof
power or abnormal operating conditions
may be responsible.
1.DisconnecttheACadaptercableplugfromthespeakersystem’sjack.
2.Placethehandleinthepackposition.
3.Wait20–30seconds.
4.Placethehandleinthekickstandposition.
ReconnecttheACadaptercableplugtothespeakersystem’sjack.
Note:SeetheHow to Position the Adjustable Handle section for handle
positions.
Troubleshooting