Measure what you see.
Manual PV-0500 Series PV-0600 Series BYK - Gardner USA 9104 Guilford Road Columbia, MD 21046 USA Phone 800-343-7721 301-483-6500 Fax 800-394-8215 301-483-6555 www.byk.com/instruments BYK-Gardner GmbH Lausitzer Str. 8 D-82538 Geretsried Germany Tel.
Directions for Using the Gardner Bubble Viscometer DIRECTIONS FOR USING THE GARDNER BUBBLE VISCOMETER A-5 to A-1 CAT. NO. PV-0500 This instrument is based on the principle that the viscosity is directly proportional to the bubble speed. The viscosity of a sample of varnish or other transparent liquid is therefore determined by reference to the standard tubes in which an air bubble rises with the same speed as it does in a tube of the sample being tested.
Directions for Using the Gardner Bubble Viscometer having the same approximate diameter with a tolerance of ± 0.150 mm. Grade “B” are used by many manufacturer for general factory control tests. This viscometer meets the requirements of ASTM D 154, D 555, D 1131, D 1545, D 1725, FTMS 14la-Method 4271, and AOCS Method Ka6. Approximate Viscosity in Stokes at 25º C (77º F) A5 0.051 A4 0.071 A3 0.140 A2 0.213 A1 0.
Directions for Using the Gardner Bubble Viscometer DIRECTIONS FOR USING THE GARDNER BUBBLE VISCOMETER A to T CAT. NO. PV-0510 This instrument is based on the principle that the viscosity is directly proportional to the bubble speed. The viscosity of a sample of varnish or other transparent liquid is therefore determined by reference to the standard tubes in which an air bubble rises with the same speed as it does in a tube of the sample being tested.
Directions for Using the Gardner Bubble Viscometer However, this close tolerance is relatively expensive, and for the sake of economy, tubes having the same approximate diameter with a tolerance of ± 0.150 mm. Grade “B” are used by many manufacturer for general factory control tests. This viscometer meets the requirements of ASTM D 154, D 555, D 1131, D 1545, D 1725, FTMS 14la-Method 4271, and AOCS Method Ka6. Approximate Viscosity in Stokes at 25º C (77º F) A B C D E 0.54 0.69 0.93 1.03 1.
Directions for Using the Gardner Bubble Viscometer DIRECTIONS FOR USING THE GARDNER BUBBLE VISCOMETER „U“ to „Z-6“ CAT. NO. PV-0540 This instrument is based on the principle that the viscosity is directly proportional to the bubble speed. The viscosity of a sample of varnish or other transparent liquid is therefore determined by reference to the standard tubes in which an air bubble rises with the same speed as it does in a tube of the sample being tested.
Directions for Using the Gardner Bubble Viscometer mm. and should be used for exact determinations. However, this close tolerance is relatively expensive, and for the sake of economy, tubes having the same approximate diameter with a tolerance of ± 0.150 mm. Grade “B” are used by many manufacturer for general factory control tests. This viscometer meets the requirements of ASTM D 154, D 555, D 1131, D 1545, D 1725, FTMS 14la-Method 4271, and AOCS Method Ka6.
Directions for Using the Gardner Bubble Viscometer DIRECTIONS FOR USING THE GARDNER BUBBLE VISCOMETER Z-7 to Z-10 CAT. NO. PV-0560 This instrument is based on the principle that the viscosity is directly proportional to the bubble speed. The viscosity of a sample of varnish or other transparent liquid is therefore determined by reference to the standard tubes in which an air bubble rises with the same speed as it does in a tube of the sample being tested.
Directions for Using the Gardner Bubble Viscometer tolerance of ± 0.150 mm. Grade “B” are used by many manufacturer for general factory control tests. This viscometer meets the requirements of ASTM D 154, D 555, D 1131, D 1545, D 1725, FTMS 14la-Method 4271, and AOCS Method Ka6.
253 017 659 EDFIS 0408 Europe
