Installation & Assembly
Measure the size of the sink, including the front apron. Cut the face
of the cabinet to allow the sink to slide in.
Use painter’s tape for marking and cutting purpose to protect the
cabinet and sink from damage.
IMPORTANT: Due to the dimensional variation from the
ceramic manufacturing process, We do not not offer the cutout
template for sinks. It is essential that prior to installation, ÞÕ
`ÃVÕÃÃ ÜÌ ÞÕÀ ÃÌ>iÀ >` >}Àii Ìi w> >««i>À>Vi°
Cabinet should NOT be cut or fabricated without the sink.
Measure the size of the sink, including the front apron. Cut the
counter top to allow the sink to slide in.
Step 1: Base cabinet Preparation
Step 2: Countertop Preparation
Step 3: Cut 2 pices of 2*4 beams to fit inside the cabinet
NOTE: It is recommended that you screw the beams
with wood glue and screws.
Step 4: Attach the beams into place with wood glue.
Allow enough time for the glue to dry (follow product
recommendation).
Step 5: Fasten the 2 x 4 beams with wood screws into the cabinet.
ALTAIR