User`s manual
Table Of Contents
- Introduction
- User Interface
- Display Elements
- Cross Country Tasks
- Glide Computer
- Atmosphere and Instruments
- Airspace, Traffic and Team Flying
- Avionics and Airframe
- Quickstart
- InfoBox Reference
- Configuration
- Data Files
- About XCSoar
- GNU General Public License
4 CROSS COUNTRY TASKS
Page: Rules
On this page you can set the rules for the current task:
• Start max Speed Maximum allowed velocity in start area. 0 = no maximum velocity.
• Start max Height Maximum allowed height over ground at task start. 0 = no maximum height.
• Finish min Height Minimum height over ground at task finish. 0 = no minimum height.
• FAI Finish Height FAI Finish height (1000m rule).
• Online Contest Rules for OLC path optimization:
• Sprint Conforms to FAI IGC League rules. Up to 5 points including start and finish, max-
imum duration 2.5 hours, finish height must not be below start height.
• Triangle Conforms to FAI OLC triangle rules. Four points with common start and finish.
For tasks longer than 500km, no leg less than 25% or larger than 45%; otherwise no
leg less than 28% of total. Finish height must not be lower than start height less 1000
meters.
• Classic Conforms to OLC classic rules. Up to seven points including start and finish,
finish height must not be lower than start height less 1000 meters. Points awarded
80% on second last leg and 60% on last leg.
37 XCSoar Manual (Altair version) • XCSoar-A-EN