User manual

XCSoar User Manual
The Edit start points button allows editing of alternate start points.
See Section 4.7 for more details.
The task waypoint dialog for turn-points in non AAT-tasks do not
contain any editable fields. For both AAT and non AAT tasks, the
finish waypoint dialog allows the finish type to be defined:
Finish type : Line or cylinder
Finish diameter : Diameter of the cylinder or length of the finish line.
For AAT tasks, the task waypoint dialog for turn-points allows the
AAT areas to be defined.
Target distance : This allows the target within the AAT area to be moved to
produce the shortest (-100%) to longest (100%) task dis-
tance. The use of targets is described further in Section 4.10.
Type : Cylinder or sector.
Circle radius : The radius of cylinder in meters for cylinder type.
Sector radius : The radius of the sector in meters for sector type.
Start radial : The start radial of the sector in degrees.
Finish radial : The finish radial of the sector in degrees. The convention is
that the sector is defined in a clockwise direction from start
to finish radial.
53