User manual

XCSoar User Manual

• From the menu NAV . Waypoint lookup

• From the task editor, menu NAV . Task Edit and select a

waypoint, then select the Select button.

The waypoint selector comprises a set of optional ﬁlters on the

left side of the page, and a list of matching waypoints on the right.

There are several ﬁlters available, which may be used together,

individually or not at all.

Name : Filtering based on the matching the ﬁrst letter in the way-

point name.

Distance : Filters out waypoints further that a speciﬁed distance to the

aircraft.

Direction : Filters out waypoints that are not in a speciﬁed direction

from the aircraft.

When ﬁltering by name, the distance and direction ﬁlters are reset,

and the list of matching waypoints is sorted by name. When ﬁlter-

ing by distance or direction, the name ﬁlter is reset, and the list of

matching waypoints is sorted by distance.

The list can be scrolled if there is more than one screen full of

matching waypoints. To scroll through the list, simply move to the

bottom (or top) of the list with the cursor.

Pressing the Enter button will select the item in the list under the

cursor. Selecting an item will result in different behaviour depend-