User manual

XCSoar User Manual
user if these waypoints are individually or all to be ignored (ex-
cluded) or loaded (included). The configuration setting ‘Wpt out-
side terrain’ can be used to ask, exclude or include all waypoints
outside terrain on subsequent loads.
12.5 Airspace
XCSoar supports airspace files (extension .txt) using a sub set of
the widely distributed OpenAir format. Files are available from
the Special Use Airspace section of the Soaring Server:
http://acro.harvard.edu/SOARING/JL/SUA
The following are the list of supported airspace types. All other
airspace types will be drawn as type ”Other”: Class A, Class B,
Class C, Class D, Class E, Class F, Prohibited areas, Danger areas,
Restricted Areas, CTR, No Gliders, Wave, Other.
12.6 Airfield details
The airfield details file (extension .txt) is a simple text format
file containing entries for each airfield, marked in square brackets
in uppercase, followed by the text to be displayed on the Way-
point Details Dialog for that particular waypoint. The text should
have a narrow margin because the waypoint details dialog cannot
currently handle word wrapping.
153