Use and Care Manual

— 2 —
2. Drill Countertop
· Cut the opening for the drain in the countertop.
ALWAYS WEAR PROTECTIVE GEAR WHEN USING DANGEROUS MATERIALS
3. Install Faucet
· Install faucet and its components.
4. Install Sink
· Check alignment of the sink to the opening in the countertop.
· Use a bead of clear silicone (or preferred adhesive) around the underside of the sink.
· Carefully place the sink on the countertop, align, and press firmly.
·
Allow sealant to set above 60 minutes.
Installer Tip : Use acetone or denatured alcohol to remove any excess sealant immediately after application.