User's Manual

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

Figure 51 – VLAN Setting – Interface Configuration

9. Go to Configuration > Network > VLAN > Interfaces

10. Click Edit to assign VLAN profile on each interface respectively

11. Change the following settings:

Type – select type of VLAN connection link:

Trunk

Able to carry multiple VLAN traffic. Typically trunk link is

used to connect switches to other switches or to routers

Access

It is part of only one VLAN; it is for end devices

If Access is selected on Type;

VLAN – assign the VLAN profile on the interface

If Trunk is selected on Type;

Default VLAN (PVID) - Stand for Port VLAN ID; select the default

VLAN for the interface

Default VLAN Tagging – Select checkbox that AP tags the untagged

packet with PVID

VLAN Pass Through - Select checkbox that AP does not modify the

incoming packets that are tagged. Also, AP tags the packets, which

are not tagged if Default VLAN Tagging is selected.

VLAN(s) – Assign one or more VLAN profile to the interface. Unlike

VLAN Pass Trough, the interface only forwards the packets to

selected VLAN.

12. Click Submit

13. Click Save & Apply