User's Manual

TPS12-016_rev1 1_A8Ein_web-admin_Configuration_Manual_-_fm_1 2 0 604 (for FCC & IC) 20130322.doc
Commercially Confidential
86
Port：Select port number of TCP or UDP.
Procedures：
1. In the main menu, selectTools->iPerf enter the iPerf configuration page；
2. Press to configure the iPert server parameters；
3. Enable Server Select Enable；
4. Server Type select A8Ein as TCP Server or UDP server；
5. Select the port number of TCP server or UDP server；
6. PressSubmit and start the test。
9 A8EIN CPU USAGE
A8Ein provides information of CPU Usage of the device.
Click on Statistics -> Processor and it shows A8Ein CPU processing and usage，A8Ein
utilize dual core CPU，you may select“1” or“0”to check the status of each CPU.
Picture below shows the statistic of Processer 1，Processer 0 will have the same layout as
Processor 1.
Figure 122 Processer 1 Usage
Details of Processer 1 usage are listed below：
On the top left corner, you can select the display timespan of usage，options available are
10 minutes、1 hour、1 day、1 week、1 month or 1 year。
Display timespan： this allow user to select the duration CPU usage.
Steps：
1. In the main menu, selectStatics->ProcessorInto the CPU processor usage statistics interface；
2. Select the CPU that will display at the statistic chart.
3. Click Display timespan to select the timespan.