User's Manual

TPS12-016_rev1 1_A8Ein_web-admin_Configuration_Manual_-_fm_1 2 0 604 (for FCC & IC) 20130322.doc
Commercially Confidential
59
7.3 SNMP SETTING
Figure 81 SNMP Configuration
Read Community：SNMP protocol read community, by default it is “public”
Write Community：SNMP protocol write community, by default it is “write”
Show：show write community phrase
Trap Host ID： SNMP Trap host ID, it supports Max. 4 Trap Host
Trap Host： Trap Host IP address
Trap Port： Trap port, by default it is 162
Trap Community：Trap community information
Enable：Trap Host state (enabled or disabled)
Press
：to edit Trap Host
Figure 82 SNMP Trap Host