User's Manual

TPS12-016_rev1 1_A8Ein_web-admin_Configuration_Manual_-_fm_1 2 0 604 (for FCC & IC) 20130322.doc
Commercially Confidential
36
Figure 45 WLAN general setting
Enable WLAN：Enable or disable this WLAN
VLAN Pass Through：VLAN pass through this WLAN
VLAN TagId：set VLAN ID
Hide SSID：Hide this SSID or not
SSID：set SSID
Allow Intra-WLAN Forwarding：Allow or block inter-WLAN communication
Max Clients：Maximum value is 512
Back to Overview：Go back to previous page
Procedures：
1. Select Configuration -> Wireless -> radio0-> WLAN to edit“ ” WLAN, and then select WLAN
General.
2. Enable WLAN select to enable this WLAN
3. VLAN Pass Through allow or don’t allow VLAN pass through
4. VLAN TagId Set VLAN ID
5. SSID set SSID
6. Allow Intra-WLAN Forwarding: Allow or block
7. Max Clients Maximum is 512
8. Click Submit
9. Click Save&Apply to apply