User's Manual

TPS12-016_rev1 1_A8Ein_web-admin_Configuration_Manual_-_fm_1 2 0 604 (for FCC & IC) 20130322.doc

Commercially Confidential

6.4.1.2 2.4G GENERAL CONFIGURATION

Select Configuration -> Wireless -> radio0-> General to access 2.4G general configuration page:

Figure 42 2.4G radio parameters

Enable Radio：Enable or disable 2.4G radio, by default it is enabled.

Radio Mode： 2.4G Radio mode

Country Code：By default, it is HONG KONG

Wireless Mode：By default, it is 2.4GHz 130Mbps(802.11ng HT20)

Radio Frequency：By default, it is 2412MHz(Channel 1)

Transmit Power：By default, it is 22

Maximum Clients：By default, it is 512

Enable Inter-WLAN Forwarding：By default, it is allowed.

Disable HT20/HT40 Auto Switch：In HT40 mode, enable or disable auto switch between

HT40 and HT20.

Procedures：

1 Select Configuration->Wireless ->Radio0->General

2 Enable Radio : Select to enable 2.4G Radio

3 Radio Mode: Select to AP mode

4 Country Code: Select your country code

5 Wireless Mode Select wireless mode

6 Transmit Power Set transmit power

7 Maximum Clients Set 2.4G maximum clients

8 Click Submit