User's Manual

TPS12-016_rev1 1_A8Ein_web-admin_Configuration_Manual_-_fm_1 2 0 604 (for FCC & IC) 20130322.doc

Commercially Confidential

Figure 40 STP Setting

Enable STP Mode：By default, it is disabled

Procedures：

1 Select Configuration->Network->STP

2 Enable STP Mode : Select it to enable STP function. By default, it is disabled.

3 Click Submit

4 Click Save&Apply to apply

6.4 WIRELESS

Select Configuration -> Wireless to access wireless network configuration page. There are 2

interfaces, 2.4G（radio0）and 5G（radio1）:

Figure 41 2.4G radio setting

6.4.1.1 2.4G RADIO

Select Configuration -> Wireless -> radio0 to change 2.4G radio setting. You can configure

the items below: General, Superwifi, WLAN, Advanced, QoS, WEP, AirFi.