User's Manual

TPS12-016_rev1 1_A8Ein_web-admin_Configuration_Manual_-_fm_1 2 0 604 (for FCC & IC) 20130322.doc
Commercially Confidential
16
Packet Rate： radio0 packet rate
Throughput： radio0 throughput
Channel usage
Please select Status -> Interface-> radio0 -> Channel Usage to check radio0 channel usage information
including: Sector, state, Tx Frame（%）, Rx Frame（%）, Busy State（%）, Noise Floor（dBm）, CTL0,
CTL1, EXT0, EXT1
When the state of a sector is ON, it means this sector is enabled. When it is OFF, it means the sector is
disabled or it is abnormal, please contact network administrator to check equipment.
Figure 13 Channel usage
Sector：A8Ein has 4 sectors from 0~3
State： A8Ein sector state
Tx Frame(%)： Sector based transmit frames percentage
Rx Frame(%)： Sector based receive frames percentage
Busy State(%)： Sector based busy state percentage
Noise Floor(dBm) ：Sector based noise floor
CTL0：。
CTL1：。
EXT0：。
EXT1：。
WLAN
Please select Status -> Interface-> radio0 -> WLAN to check radio0 wireless network information
including: Device Id, WLAN, SSID, MAC Address, Auth Mode, Unicast Cipher, Multicast Cipher, Num of
Station, Unicast Packets（TX/RX）, State.
When you enable a WLAN, you can find its relevant information in “State”.