User's Manual

TPS13-001_rev1_4_A8n_series_Installation_Guide_for_FCC.doc

Commercially Confidential

2.1 A8-Ein Base Station Mounting Kit

A Main mounting module

B Mounting back plate

C 4x mounting screw and nut

D 4x locking screw

Figure 3. A8-Ein Base Station Package

2.2 Mounting A8-Ein on Pole

1. Assemble the mounting kit according to Figure 4 with one side of the screw installed.

2. Mount the kit to the pole at the desired height and tighten all 4 screws to fix its position

(Figure 5).

3. The mounting kit must be installed with the key hole pointing down (Figure 6).

4. Clamp the A8-Ein unit to the mounting kit, as shown in Figure 7 and make sure the

mounting screw is locked in the key hole.

5. Screw in 4 locking screw to secure A8-Ein with the mounting kit (Figure 8).