User's Manual

91
Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Guide
Altai Technologies Ltd. All rights reserved
7.2.3. Traceroute Test
Network administrator tests the route (path) and measuring transit
delays of packets across an Internet Protocol (IP) network by using
traceroute test.
Figure 103 – Traceroute Test
7.2.3.1. How to perform traceroute test
1. Go to Tools > Diagnosis > traceroute
2. Type target IP address / host name in Destination IP Address/Host
Name
3. [Optional] Click Enable Resolve IP addresses checkbox to enable IP
address to domain name translation
4. [Optional] Specify timeout interval between 1s and 100s in Timeout
for traceroute test
5. [Optional] Specify TTL value between 1 and 100 in Pings Per TTL; 3 is
default setting
6. [Optional] Specify TTL value between 1 and 100 in Maximum TTL; 30
is default setting
7. Click Start
8. Click Stop to terminate ping test if necessary