User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

6.2.4.3. Radio0 (2.4G)

Figure 91 – Radio 0 Status

MAC – MAC address of Radio 0 interface

Channel – indicate operating frequency (channel) of Radio 0

Wireless Mode – indicate 802.11 standards that Radio 0 operates

Noise Level – indicate the noise level in terms of dBm of operating

channel

Transmission Power – indicate the total transmission power of Radio 0

Transmit – indicate the traffic and instant throughput of transmission on

Radio 0

Receive – indicate the traffic and instant throughput of receive

operation on Radio 0

Mode – indicate operating mode of Radio 1

WLANs - indicate the number of operating WLAN on Radio 0 (AP mode

and Repeater Mode only)

Clients - indicate the number of clients that Radio 0 servers currently

(AP mode and Repeater mode only)

Connection – indicate connection status between Radio 0 and remote

AP (Station mode only)

AP SSID – indicate the SSID that station associates with (Station mode

only)

AP SNR – indicate received SNR from remote AP (Station mode only)

Busy – indicate busy of operating channel

6.2.4.4. Radio1 (5G)

Figure 92 – Radio 1 Status

MAC – MAC address of Radio 1 interface

Channel – indicate operating frequency (channel) of Radio 1

Wireless Mode – indicate 802.11 standards that Radio 1 operates

Noise Level – indicate the noise level in terms of dBm of operating

channel

Transmission Power – indicate the total transmission power of Radio 1

Transmit – indicate the traffic and instant throughput of transmission on

Radio 1